• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is essential to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to locate some plastic spacers to assist the new pane to fit correctly into the frame of the window.

If you're planning to try to remove the window panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor and could be trampled.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your home until a professional is able to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap between the window and the door is significant, you may want to use security screens that has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, uPVC repair using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and verify the an appropriate fit. If you're happy with the fit, tighten the screws until they remain in the right place.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. Often this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window doctor and do an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may require removal before a new layer is applied. When it is time to uPVC repair, you must be careful not to over-caulk. This will only make your window harder to clean and reduce its energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been properly angled to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens in the breeze. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is an easy process but it can be simpler if you have someone to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or due to improper installation in the factory. This can often be resolved by sending us a photo via our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to have them aligned or replaced. The interlock may be misaligned. This happens on the hinge side and could require to be cleaned. In some instances it might be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. It is crucial to recognize that all windows have a life span and eventually, they will reach an point at which it is more economical to replace them than fix them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as possible.