• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can appear daunting but it's easy to do with the right instructions. First, determine the height you would like the flap to be (on average, belly height). Mark this point on the door and then use the template as a guideline to drill.

If you have a kitten that is still a newborn then gently prop the door slightly open and encourage it to go through. Reward the kitten as it passes.

Measure the Door

A cat flap allows your pet to enter and exit your home at its convenience. This can help keep your cat healthy by making sure that it is getting exercise and also being able to go back in if it is stuck outside in the rainy weather, especially in winter. This will reduce the amount of time you allow your cat go in and out and make your home secure by notifying you when it's gone.

However, it is essential that the flap for your cat flap installer is properly fitted to stop your pet from being able to escape through it or be pushed through by other animals (e.g. dogs). It is important to measure the height of your pet's belly as well as the entrance to your home so that you can ensure that the flap is at the right height. You can alter the height of your flap when your cat is taller or smaller than the average.

Then, use a spirit-level to mark the center of the door. This is where you will install the flap. With the markings as a reference, use an jigsaw to cut the shape of the flap inside the door. After cutting the area then sand the edges to create smooth surfaces. Make any holes that are required.

The process of installing a cat flap isn't as difficult as you think and it should not take more than two hours to finish the entire job from start to completion. The process can be slightly more difficult if you have to put it in a uPVC door or composite one. This is because these doors are available in a variety of thicknesses, which could affect the way that holes are cut. This is the reason we recommend hiring an expert to do the work, particularly in the event that you've never worked with glass before.

Measure Your Cat

You can save yourself hours of listening to the cat's meows to be allowed in or out. This is especially useful when your cat is inside during the winter months when you are at work.

It is crucial to measure your cat first before attempting to install. While it may seem to be a simple task, it is important to make sure you measure correctly or your cat will find it difficult to use.

First, make sure your cat is calm prior to taking measurements. You'll need to hold them in a manner that they cannot move and also ensure that the ruler or measuring tape is flat against their body, not bending in any place. You can get a precise measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've got your cat's measurements and measurements, you need to examine the door to decide where to put the flap. It is advisable to place the flap at the height of your cat's belly because this will allow them to move through it with minimal effort. This will also stop the flap from making lots of noise when it swings open and closed.

You will need to think about the thickness of the uPVC or composite door too. Although timber doors are of a similar thickness, uPVC and composite doors may differ in their overall structure and can make fitting a cat flap bifold doors flap more difficult since you have to ensure that the hole you cut is the correct size for your pet.

It is also worth studying the instructions included with the cat flap kit to find an outline of the template that can be used to determine the position of the hole in the door. This will help you to determine where the opening needs to be and ensure that the template is correctly positioned on the door. It is also helpful to employ a spirit-level to ensure that the template is placed flush against the door.

Cut the Flap

Before you can install your cat flap, you'll must cut the door panel to make a space big enough for it. This is a difficult task and it is recommended to seek out the assistance of a professional cat flap fitting - atavi.Com - service for this step if you don't have the skills or experience to do it yourself. It is also recommended to read the instructions included with the cat flap kit to learn how to do this properly.

You can use the height of the cat's or kitten's stomach as a guide. In general you should place the flap about 10-15 centimeters above the ground. This is the average height of the stomach for cats. This will let your cat pass through the flap without difficulty and make it more difficult for other cats or naughty neighbours to enter or exit.

Once you have determined the best location for the cat flap to be placed, mark this location on the door using a pencil. Then, if your kit comes with a paper template, lay this over the door and use the markings to drill holes into every corner of the template. After that, you'll be able to cut the template and replace it with the cat flap.

If you are installing your cat flap on a door made from wood or upvc door panels cat flap, you can do it yourself if you feel confident enough to handle the Jigsaw. Be sure not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw to cut your panel into a square or a circle according to the way you'd like to cut it. Make sure to take your time and don't try to force the jigsaw to cut faster.

Once the hole has been made, carefully place the cat flap in its new place of residence. Make sure that it is firmly secured. If the flap has screw caps, push them onto the protruding bolts. Once the screws have been installed, sand the rough edges and seal any gaps. This will prevent drafts from entering your home.

Fit the Flap

If you have a basic cat flap you can leave it open and encourage your pet to go through by placing a small amount of cat food on the outside of the door. You can also push the cat with the help of a stick or your hands. Once your cat is accustomed to walking through the flap, it is likely to be able in and out as it pleases so you can let it out or in without having to be there keeping the door open for it all day (and potentially in all weather conditions).

It is possible to fit an animal flap inside an UPVC or glass door however it's not as simple as fitting one into a timber exterior door due to the fact that the UPVC and glass doors don't have a consistent thickness. This could have a significant impact on the way you cut out the flap hole and also how well the flap fits after installation.

Based on the type of cat flap you select It could include a mounting kit as well as a template that will show you exactly where to drill holes for it. If the kit does not include a template, you can photocopy it to make your own. When cutting, it is important to keep the jigsaw from being pushed too to the point that you make a larger hole than is necessary in your door.

Certain cat flap in bifold doors flaps come in circular shapes, which can be more difficult to put in. If you have a circular flap it's essential to make sure the hole is in the right position on your door, because if it's not, your cat will not be able to use the flap and could be stranded in the open all day (or even at night).

Some cat flaps have locks that allow you to control the time your cat flap installers can enter and leave. These are very helpful if you're worried about your pet going out at night and coming back in because of the darkness, or you're at work for the entire day. Certain locks can be used for access or exit, and others can be locked in both directions. This is useful for older cats or sick cats who aren't keen to venture out in cold weather.