• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

The handles on your doors are worn out with time and require to be replaced. It is important to keep the same dimensions as the handles you have previously replaced when replacing them.

The top screw position as well as the lever and keyhole size are the three measurements you need to verify. Use the size guide to assistance in this.

Inline Lever/Lever

A lever/lever door handle is a modern handle that can be installed on replacement or new doors. This kind door handle is offered in a variety of styles & finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of sturdy materials and are perfect for doors with multi-point locks that require a strong design. The handles are inline and run with the same spindle as well as screw fixings, so they are easily installed on doors made of uPVC/Composite, either new or old.

The sprung lever design allows the handle to be set and angled for comfortable operation and is suitable for all users. The handle has been endurance-tested to 200 000 cycles. This helps to ensure that the finish is of high quality and performance is maintained over time. The sprung lever is adjustable to accommodate a wide range of locks. This is particularly useful for doors with narrower frames, in which the cylinder is further back. A shorter lever can be used for doors with a latch which can be operated with the thumb located on the inside.

Lever Pad

The lever pad upvc door handle handle is different from the lever handles used on the majority of doors. These handle types can either work off one single spindle (inline) or independently from each side by using two inline or offset spindles (pad). They are typically employed on UPVC doors with double glazing and come in a range of finishes & variations.

The handles have been tested to the minimum of 200 000 cycles and are available in a variety of finishes like White and Silver, as well as Chrome & Gold. The finish is BS EN 1670 Grade 5 and is resistant to corrosion. This provides the handle with a high performance and durability to serve its intended purpose.

All UPVC handle lever pads include a spindle and screws and can be mounted on a uPVC door. The backplate fixation centers of 211mm allow for a wider handle, which is often beneficial when replacing window handles a damaged or old multi-point door lock mechanism. The levers for these handles have springs, which eliminate the issue of handles for doors that slide out of horizontal position when they are not being used.

It is crucial to ensure that the PZ dimensions for both the multipoint lock as well as the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement is often called the 'handle centre' or 'cylinder centres' and is a critical aspect of matching up the appropriate handles.

Once you have decided on the correct size of PZ, you will need to ensure that the lever and push pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. They are usually a square or round shape with an internal lever and an external push pad.

The majority of UPVC Lever Pads we sell are sprung. This means that they will return to a horizontal position after they are not in use instead of hanging, and possibly sticking in the frame. This prevents drafts and cold air from entering a home. The majority of UPVC lever pad handles are available in left and right handed models that allow them to be installed on either side of the doors.

Euro Cylinder

Cylinder locks are typically used on uPVC doors, but they can be utilized on other types of doors. They work by using a key to unlock a cylinder that will reveal pins that can be aligned with those in the lock body and allow them to rotate the cam, thereby opening the door. Euro cylinders can be equipped with up to six pins with both internal and external doors typically having different levels of security.

The selection of a cylinder is vital. It is based on the amount of use your doors and handles receive. For instance, exterior doors require a more secure cylinder while internal doors can be secured using a standard cylinder. In addition, some cylinders are available with extra features which can enhance security even more, like anti-drill or anti-bump features.

To ensure that the euro cylinder is of the right size for your door, it should be measured accurately. The cylinder needs to be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. If you are unable measure it using the lock in a fixed position, you can remove it. It is crucial to avoid having a cylinder that extends beyond the handle or escutcheon. This could make it vulnerable to snapping lock attacks.

Most modern cylinders are made with anti-drill and bump resistance features built into their design. They are designed to decrease attacks by forcing cylinders to rotate in a different direction. This helps deflect the attack and keep your doors safe.

There are cylinders constructed to resist snapping. This is a growing type of attack on cylinders, where the break line in the lock is attacked using a special tool to break the front of the cylinder and allow the door to open. This is a much faster and more convenient method of gaining access than a multipoint locking system. It also leaves no evidence of the break-in which can hinder insurance claims.

Spring Cassette

The spring cassette is situated in the base plate of your door handle. It is a spring-loaded solution to return your multipoint lock handles to their original position after use. These handles used to have no spring and would drop when the locking mechanism was disconnected. This component is the most effective way to solve this issue. It also stops your upvc door from becoming stuck in the closed or open position, as they aren't easy to close manually.

These spring cassettes were designed to be used with a spring multipoint lock. They won't work with handles that are not sprung and you'll need to cut a hole in your backplate in order for them to fit. (Please look at the image for a technical diagram). They are a replacement for existing broken or missing cassettes within the door handle backplate of numerous brands of uPVC doors. They are fitted with a square cut out which can accommodate an 8mm spindle, and are sold as a set.

These spring cassettes are a great value for money way to fix the problem of door handles that are sliding. They are simple to install and will prolong the life span of your upvc door handles doors. Please contact our team for more information on our wide range of uPVC accessories and spares. We are always available to offer professional advice and assistance you.