• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions against theft with the Ghost Alarm Installation Immobiliser. It is discreet and does not require any additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence up to 20 presses. This allows your vehicle to start.

Simple PIN code Change Process

Many owners are upgrading their security because of the increase in vehicle theft. There are many types of security products that are available including tracking systems, alarms and immobilisers. Not all of them are equally effective at protecting your vehicle. A tracking system can aid in finding your vehicle if it's stolen, but it will not stop the crime. An immobiliser, on the contrary, does exactly what it says on the label: it shuts off the engine of your vehicle so that it is unable to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your vehicle.

By using the buttons that are already present in your car, the ghost device creates an unique sequence that must be entered before the engine starts. This can be done via the indicator stalk or window buttons. In addition to this, there is also a mobile app which can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This option is particularly useful if you need to give your car away to a valet service or parking since the immobiliser will still be activated, but not disabled.

The Ghost is a truly unique and ingenious device that works in conjunction with buttons of your car rather than being a standalone unit. It is not only an effective deterrent to vehicle theft and vandalism, but it can be used to secure any future vehicles you own. This makes it a far more cost-effective option than a traditional wheel lock.

Weatherproof tiny device

The autowatch ghost installers west midlands Ghost Immobiliser is a sophisticated security device that shields your pride & joy from key cloning and hacking. It also blocks ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to shut down the engine. It can be fitted into the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are a common technique used by thieves to get around existing immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as detected by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique disarming sequence. You can create a sequence that is as long as 20 presses to increase security. The iPhone app lets you make a single, authorised connection with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost also prevents thieves from stealing a new key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to run when the correct PIN code is entered. It can also be put into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service to be serviced without needing to enter a PIN code.

Tested for each vehicle

The autowatch ghost immobiliser cost Ghost is the first aftermarket immobiliser for CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from going through its normal initialization process until you enter an individual passcode. The system can be turned on or off via your smartphone's app, without the need for additional wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if a transponder of a different vehicle is used instead, the immobiliser won't recognize it. This makes it possible for the vehicle to start and be stolen. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It safeguards your car from hacking, key cloning and even key theft. Only by physically towing your vehicle away can thieves take it away, and they would still not be able to drive the vehicle.

ghost immobiliser for sale uses buttons on your vehicle, such as the indicator stalk, the steering wheel, and doors, to generate a unique PIN code that needs to be entered in order to use your car. This is done without the need for additional hardware like a key-fob and can last up to 20 presses long. It is also unrecognizable to diagnostics equipment and doesn't transmit radio frequency signals so thieves are not able to use sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.

Unlike physical anti-theft devices like clamps or wheel locks ghost 2 immobiliser review is hidden within the vehicle so it can't be disabled or removed by thieves. It's also harder to remove than a car alarm, which requires disarming using the use of a button sequence. This makes it a perfect complement to a GPS tracker that can assist in locating your car after it's been stolen.

Emergency PIN code override

You don't have to look very far on social media for stories or videos of cars that were stolen using the latest technology tools. This includes key-cloning and hacking devices that allow the vehicle to start without your original key fobs.

The Ghost immobiliser was designed to combat this, and give you an extra layer of security in order to prevent your vehicle from being targeted by thieves. It is created by creating an unique pin code push sequence using the buttons you have on the steering wheel, door panel and centre console. The unique pin code must be entered in conjunction with your original key fob to stop the vehicle from starting. The unique override PIN can be found on the black card that you will receive following installation. It is simple to remember as there are no LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals. This means it can't be detected by diagnostic software that can tell the type of security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to most security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely with an electronic block of commands to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems but this must be stated prior to the installation of the device. They are also fully service/valet mode compatible and a good alternative to a tracker if you are you have your car checked for repair at the dealership.

Service/Valet Mode

In recent times, there has seen an increase in the number of cars being stolen from owners without keys. It's easier than ever to steal your pride & joy thanks to the availability of key cloning devices and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if you keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other car hacking devices. It also protects against adding a new key or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden inside your car and is accessed by existing buttons on your steering wheel, center console and door panels. Before you can start your car, you must enter a unique, changeable PIN code up to 20 numbers.

This is the first aftermarket CAN bus immobiliser that was created. It will stop your vehicle from being started or driven in the event that you do not enter a PIN number first. If you're driving away with the device in motion, an indicator will appear on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car immobiliser ghost will continue to function normally. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN every time you try to start your car.