• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they generally fit into frames of the past easily. If windows with double panes are joined by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need to find some plastic spacers to assist the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall on the fabric rather than on the floor where they can be trodden under and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent drafts and water from entering the home until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders from getting access to your home. If the gap is large, you may want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. It's important to take action immediately if you notice your uPVC windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to open the windows so you can get at the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to move the hinges, uPVC window repairs you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your upvc repair window waterproof and draughtproof.

UPVC handles can also become loose. Often it is due to screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need close your window and do a test to ensure that it fits. The corner joints of the sash should align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and floors that are wet. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious situations, you may have to replace the window.

Other signs of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to note that if the leakage is coming from between the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze It could be hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. The process of replacing a hinge on a window is an easy procedure, but it is easier when you have a person to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or due to poor installation at the factory. Sending us photos through our website can often resolve the problem. We are always happy to offer suggestions.

It is also important to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window operate and close more easily. It also decreases the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. The hinges may also become unbalanced due to wear, which can cause a gap where the sash and frame meet. These can be easily repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them realigned or replaced. In addition, the interlock could also become misaligned. It is located on the hinge's side, and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals, these are prone to wear or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide excellent security and insulation for your home. It is essential to remember that all windows eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.