• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into frames of the past easily. However, if windows with double glazed window repairs panes are secured by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this situation you'll need to locate some plastic spacers that will help the new pane to fit properly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass to ensure that any shards will fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional is able to repair the window. This also serves as a barrier to prevent any intruders from getting into your home. If the gap is large, you might think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues, including sagging. A sagging uPVC window could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from worsening.

Repositioning the hinges could aid in fixing a window which is sliding. To do this, you'll need open the window repair to get to the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, close your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and then perform an experiment fitting. The corners of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to take action if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on the severity of the issue the old caulking might need to be removed before a new layer of caulk is applied. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens with a breeze. They can be repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's easy to change a window repair hinge, but it's easier if someone else helps you hold the frame.

Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window repair should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. This can often be resolved by sending us a photograph via our website and we will be more than happy to give you advice.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It can also lower the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges can also be misaligned due to wear, creating an opening where the sash meets frame. These can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window repairs near me, may also become misaligned, again it is feasible to give them a clean but in certain cases, it may be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and will reduce draughts.

Another, and most effective methods to reduce draughts is by using a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be placed on the top of your windowsill. These will help to block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than repair them. If you have any problems with your window made of upvc you should consult a professional immediately.