• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Fix a Loose Door Hinge

Most homeowners can repair hinges that are loose. But, if the screw holes are stripped and can't hold screws, you might need to use dowels and wood glue before you can install the hinge.

Remove any surface corrosion. This will help keep the dowels in place and give them a solid base to hold onto.

Eliminating the Hinges

Many standard door hinges can be removed, which makes it easier to move the door from one side to another or to remove the entire door off of the frame should it be needed. The removal of the hinges is easy for anyone with a bit of patience, but you have to know how to do it right.

If the hinges are painted, you will need to remove the paint prior to attempting to remove the pins. You may scratch your door if do not remove the paint. Place the hinges in a stainless steel pot and fill it with water to the point that the hinges are submerged. Let the hinges sit in the pan for 30 minutes. The heat from the water should soften the paint and make it easier to get rid of the pins.

Once the pins are loosened, remove the hinges and frame from the door. It is possible to use a standard screwdriver, but a magnetic screwdriver is recommended for this job. This type of screwdriver was created to remove screws made of steel and make the task go much faster.

It is a good idea to spray some lubricant on the hinges prior to trying to remove them. A simple lubricant can make the process to go more quickly and help you remove the pins and screws. You can find this kind of lubricant at most hardware and home improvement stores.

Keep in mind that the number of door hinges you'll need will vary depending on the door's type and the configurations. Doors with solid cores and heavy weights will require more hinges while hollow-cored doors that are lighter may only need two or three.

Understanding the different types of hinges can help you determine which one is best for your needs. The hinges on the exterior are designed to withstand the weight of a door, while interior hinges need to be able support lighter loads.

Reattaching the Hinges

Sometimes a door hinge will loosen over time and start to hang crookedly or sag. This can cause problems but is usually easy to fix. A simple retightening will usually solve the issue. If the screw holes have been stripped out, it could be difficult to fix. A wood dowel could be used to tighten the holes once more.

Begin by drilling out the hole you had previously made using the drill bit that is similar to the size of the new screw (typically 3/8"). Fill in the hole using wood glue and a wooden stick. To ensure a tight fit, the dowel must be cut to the same length as the screw. Reinstall the screw, and tighten to desired tightness. If the door does not stop bind up, you can insert another dowel to the gap. Repeat the process. Be sure to shut the door slowly so that you can verify the clearances at the perimeter after each adjustment.

You can also use a wooden plug instead of the dowel. This is also a viable option however it may take a bit longer to install. Simply whittle a chunk of wood to the right size for a snug fit, then press it into the hole. If you don't have a woodworking instrument or toothpicks, you can make use of toothpicks or matchsticks made of wood.

Use a countersink to make the hole smaller for the head of screw after you have reinstalled it. This will prevent the screw from hitting the edges of the aluminium hinged doors when they are closed and opened. This will make it easier to tighten the screws before reinstalling hinges.

After you have reinstalled the hinge, be sure to coat it with a dry lubricant in order to ensure that it doesn't get stuck in the future. You can use products like PB Blaster and Liquid Wrench. Apply a thin layer and allow it to penetrate the barrel of the hinge for approximately 15 minutes.

Refinishing the Hinges

If you're not sure if you're ready to replace the hinges on your door, you are able to make a few repairs. The first step is to make sure whether the screws that secure the hinge plate to the frame and door are tight. If they're loose, tighten them using an electric drill or screwdriver. Be careful not to over tighten the screws as this could cause gaps to form at the trim joints, or more seriously, tear out the threads.

If the issue is that the hinge plates are separating and you want to reattach the plates by applying wood glue to the side of them and inserting wooden dowels or toothpicks in the holes. The toothpicks or dowels will give a solid foundation for the screws and keep the plates from moving when you drive them into position. Allow the glue to dry before reattaching your hinge.

The screws could also be smashed or gone. This problem can be fixed by replacing the screws. Make sure you use a drill bit that is compatible with the size of the screw hole to avoid drilling into other parts of the jamb or hinge.

Once you've reattached the hinge shut the door and check the gap between the frame and the door. The gap should be the thickness of a penny all around or less if an old door was hung incorrectly. This shouldn't be a problem if hinges are installed correctly.

If you notice that the hinges are loose, try putting a thicker hinge shim between the hinge plate and the mounting surface to give some extra space. You could also try removing the hinge pin from the problematic double glazing window hinge repairs and pounding it with a hammer to make it more secure or using the hinge pin from a different angle altogether. You can also grease your hinges with mineral oil or jojoba to decrease friction and help keep them in place. Regularly lubricating your hinges will aid in keeping them from becoming stiff or squeaky and can also extend their life.

Cleaning the Hinges

The friction generated by the constant movement of a hinge attracts dust particles. These particles can get stuck and build up in the moving parts of door hinges if they are not cleaned and lubricated regularly. The hinge will become stiff and creaky, and its appearance may rapidly deteriorate. Regular cleaning, lubrication and inspection will preserve the functionality and quality of hinges on a door.

Examine the hinges to determine how much rust has formed on their surfaces. If the rust has become so severe that it has damaged the surface of the screw holes or the barrel of the hinge, you'll need to replace the hinges. If you are able to save the hinges, you can remove any loose rust with a wire brush and steel wool. Apply a commercial rust removal solution or homemade solutions like lemon juice to the hinge. Allow the rust-removing solution to be on the upvc window replacement hinges for several minutes to penetrate and dissolve any remaining rust.

Retightening screws can restore hinge functionality If you don't wish to spend time or money on repairing hinges. It is possible to add dowel or shim made of wood to the hinge in the event that the screws have been shaved. Dowels made of wood come in round rods of varying lengths and sizes. They can be purchased online, at stores selling woodworking supplies and at home improvement stores.

A shim may also be made from a piece of metal or plastic, depending on the type of hinge you've got. To make a dowel, cut a wooden dowel to the desired length. You can then dip the dowel in a glue for carpenters and then insert it into the stripped hole and let the glue hold the dowel in the right position.

Before you begin cleaning the hinges, place down a paper or cloth towel to shield floors and other surfaces from spills and drips that may happen. After the area has been secured and dry, clean the hinges with a soft sponge or cloth dipped in a mild cleaner or vinegar to eliminate built-up dirt, grime and tarnish. You can use a toothbrush or small brush to reach difficult-to-reach places in crevices or tight areas.