• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The porsche 911 ghost installer Immobiliser

Ghost Immobiliser can safeguard your prized property from theft. This system is discrete and does not require any additional key fobs.

The device uses existing buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence of up to 20 presses long. This will then allow your vehicle to begin.

Simple change of PIN code

Many homeowners are upgrading their security because of the increase in vehicle theft. There are many different types of security products that are available for sale that range from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. A tracking system can assist you in locating your car if it is stolen, but it will not stop the crime. An immobiliser, on the contrary, does exactly what it says on the tin: it disables your car's engine so that it cannot be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to take your car.

The audi rs4 ghost installer device uses the buttons on your car to create a unique sequence which must be entered in order for the engine to begin. This can be done using the heater, window or indicator stalk buttons. In addition, there is also a mobile app which can act as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This is an excellent option if you want to give your car to valet parking or servicing. The immobiliser will remain in operation.

The ghost immobiliser 2 is a unique and ingenious device that works in conjunction with the buttons in your vehicle rather than as a separate unit. This means it's not just a powerful protection against theft of your vehicle, but it can also be transferred to any future vehicles you have, making it more investment-wise than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that protects your car from key cloning and hacking. It also stops ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also indestructible to jamming devices that are the most common method used by car thieves to circumvent the immobilisers in place.

The benefit of using CAN data is that it runs silently compared to traditional systems. It's not detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by traditional diagnostic tools. The autowatch ghost installers Ghost does not employ LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console, or doors, to create a unique disarming sequence. You can even create a sequence that is up to 20 presses long to increase security. The iPhone app is limited to one connection, using an individual pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start if a valid PIN code has been entered. It can be temporarily operated in Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can offer your vehicle to an attendant or valet without entering an entry code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from going through its normal initialization process until you enter a custom passcode. The system can be turned on and off using your own smartphone app without the need for additional wires.

The factory-installed immobilisers function by using a transponder, which is built into the key. This sends a message to the ECU. The car will start if the correct code is transmitted. If, however, the transponder of a different vehicle is used instead, the immobiliser won't recognise it. This allows the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology has developed the Ghost immobiliser. It protects your pride and joy from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away and even then, they would not be capable of driving it.

Ghost uses the buttons in your vehicle including the indicator stalk as well as the steering wheel and door panels to generate a unique PIN sequence that can be changed that needs to be entered before you can drive. This is done without any extra hardware, such as a keyfob. It can take up to 20 presses. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is concealed within the vehicle, so it cannot be disabled or removed by thieves. It is more difficult to remove than a car alarm that requires disarming with the use of a button sequence. This makes it a great complement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Override of emergency PIN code

You do not have to look far on social media to find stories or even videos of vehicles that have been taken by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without the original key fobs.

Our ghost immobiliser review immobiliser is specifically designed to prevent this and offer an additional layer of security to protect your vehicle from being targeted by thieves. It works by creating an individual pin code sequence that is triggered by your existing buttons on the steering wheel, door panel and the centre console. The unique pin code is entered alongside your original key fob in order to prevent the engine from getting started. The unique override pin is found on a black card that you receive following the installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit radio signals. This means it can't be detected by diagnostic software which can identify what type of security systems you have installed. This makes it an excellent alternative to an alarm.

Contrary to most security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems, but this has to be specified prior to installing the device. They are also service/valet mode-compatible and a great alternative to a tracker when having your car in for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent times there has been an increase in vehicles stolen without the owner's keys. It's now easier than ever before to steal your pride & joy due to the availability of key cloning tools and door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if you keys have been cloned.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely silent because it does not utilize radio frequencies or key fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also protects the user from using a new ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden within your car and can be accessed by existing buttons on your steering wheel, center console, and door panels. Before you can begin your car, you need to enter a unique, changeable PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car being started or driven away without a PIN code being entered before. If the device is armed and you attempt to drive away, it will display an indication on your dash which will flash regularly for around 300m. If you type in your PIN code at this point, it will disarm the anti-hijack system and your vehicle will continue to operate just as normal. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN every time you attempt to start your car.