• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The ghost 2 immobiliser installation near me Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. This system is discrete and does not require additional key fobs.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be modified up to 20 times. This will allow your vehicle to start.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are many kinds of security products that are available for sale, from tracking systems to alarms and immobilisers. Not all of them are equally effective in protecting your car. A tracking device can help you locate your vehicle if it's stolen, but it will not prevent the crime. An immobiliser, on contrary does exactly what it says on the tin: it shuts down the engine of your car so that it is unable to be started. The autowatch ghost 2 installers near me (duffy-Good.technetbloggers.de) porsche 911 ghost installer is one of the most sophisticated options available, making it almost impossible for thieves to steal your car.

By using the buttons that are already present in your car The ghost device generates an exclusive sequence that has to be entered before the engine starts. This can be accomplished by using the window, heater or indicator stalk buttons. In addition to this option, there is an app on mobile that can act as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This option is particularly useful when you need to hand your car over for valet parking or maintenance because the immobiliser will still be activated, but not disabled.

The Ghost is a truly unique and ingenious device that is used in conjunction with the buttons on your vehicle instead of being a separate device. This means it's not only a highly effective security measure against theft from your vehicle but can also be transferred over to any future cars you may have, making it more investment-wise than the traditional lock on your steering wheel.

Weatherproof tiny device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking & ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It is also immune to jamming devices, which are a common technique that car thieves use to bypass immobilisers.

The benefit of using CAN data is that it operates silently compared to traditional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch ghost 2 immobiliser review doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console, or door panels, to create a unique disarming sequence. This sequence can be extended to 20 or more presses to provide additional security. The iPhone app lets you make a single, authorised connection, with the pairing code unique to the Ghost and communication between the two devices is encrypted.

The Ghost stops car thieves from adding a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It is possible to operate temporarily in the Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can offer your vehicle to an attendant or valet without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects signals to stop your car from starting up normally until you enter a specific code. The system can be turned off or on by using your smartphone app without the need for additional wires.

Standard factory immobilisers on automobiles function through a transponder built into the key that sends a signal to the ECU. The car will start if the correct code is sent. However, if the transponder from a different vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser was created by an South African company at the top of the line in vehicle security technology. It protects your pride and joy from hacking, key cloning and even key theft. The only way thieves could take your car is by physically towing it away and even then, they would not be able to drive it.

Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to generate unique PIN codes that needs to be entered to use your vehicle. This is performed without the need for additional hardware, such as a key-fob and can last up to 20 presses long. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that a system has been installed.

ghost immobiliser car is more difficult to remove than car alarms, which require disarming with the buttons. This makes it a perfect alternative to a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You don't need to look too far on social media sites to find stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow the vehicle to start without the original key fobs.

The Ghost immobiliser helps combat this issue and offers an additional layer of protection to stop your vehicle from being stolen if it is targeted by thieves. It creates a unique pin code sequence that is triggered by your buttons on the steering wheel, door panel and the center console. The unique pin code is entered in conjunction with your original key fob to prevent the engine from starting. The unique override pin can be located on a black card that you receive following your installation. It is easy to remember since there are no LED indicators.

The device is hidden within the vehicle's wires, and does not emit radio signals, therefore it cannot be recognized by criminals using diagnostic software that is able to detect the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Unlike other security systems, that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker to these systems but this must be specified before installing the device. They are also service/valet mode-compatible and are a great alternative to a tracker when you are taking your car in for repair at the dealer.

Service/Valet Mode

In recent times there has been a increase in vehicles that are stolen without owners' keys. With the ease of access to key cloning equipment & door lock pick sets it is now much easier for thieves to steal your pride and joy. To stop this, we are now offering the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys were cloned or your vehicle was stolen.

It connects directly to your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely quiet since it doesn't use radio frequencies or a key fob. It isn't detected by diagnostics or any other hacking device. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system, since only the correct PIN code can allow the engine to start.

The device is hidden within your car using existing buttons on the steering wheel, centre console and door panels. Before you can start your car, you must enter a unique and changeable PIN number that is up to 20 digits.

This is the first aftermarket CAN bus immobiliser that is being developed. It can prevent your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If you're driving away with the device arming the indicator will flash on your dashboard which will flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run as normal. If you do not enter your PIN code at this point, the warning will continue to flash and require a new PIN code for every attempt to start your car.