• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can seem intimidating but it's simple to install with the proper instructions. First, decide how high you want the flap to be (on average or belly height). Mark this point on your door and use the template provided as a guide when drilling.

If you have a young kitten, prop the door open a bit and gradually allow it to pass through. Reward it as it passes through.

Measure the Door

A cat flap is a wonderful method to let your pet leave and come inside and out of your house as it likes. This will help keep your cat healthy by making sure that it gets exercise as well as being able to go back in if it is trapped outside in bad weather, especially during the winter. It also can reduce the amount of time you have to spend letting it out or in and can ensure your home is secure by allowing you to know when it has gone out.

It is important to ensure that the cat flap is placed correctly in order to prevent your pet from being pushed through it or escaping by other animals (e.g. dogs). It is crucial to determine your pet's belly height and the doorway of your house to make sure that the flap is at the correct height. You can adjust the position of your flap when your cat is smaller or taller than average.

The next step is to utilize a spirit level mark the center of the door that you will be installing the flap. With the markings as a guide, take an jigsaw to cut the shape of the flap in the door. After you've cut the area, sand the edges of the door to smooth the surfaces. Then drill any fixing holes needed.

Fitting a cat flap should not take longer than two hours. However, the process can be slightly more complicated in the event that you have to put it into the door of a uPVC or composite door because these doors come with an array of thicknesses that can affect the way the holes are cut and what they are inserted into. This is why we always recommend calling an expert to do the task, especially if you have never worked with glass before.

Measure Your Cat

A cat flap can save you from hours of listening to your pet meow to let it out or in. This is particularly helpful for those who work all day and your cat is in the waiting room until you come home in any weather.

If you want to fit a cat flap inside your door, it is essential that you determine the size of your cat prior to beginning the task. It may appear to be a simple task, but it is essential to measure your cat correctly. If not, your cat might find it difficult to use.

First, make sure your cat is calm before taking measurements. You will have to hold your cat in a place in which they cannot move. Also, make sure that the measuring tape is straight and not bent against the body. You can get a precise measurement by keeping the measuring tape or ruler flat against the body of the animal from the top to the bottom.

Once you have the measurement of your cat's body, it's time to take a look at the door and decide on where to put the flap. Place the flap at the level of your cat's belly. This will allow them to walk through the door without much effort. This will also stop the flap making lots of noise when it swings open and shut.

You will need to consider the thickness of the uPVC or composite door as well. While all timber doors have a similar thickness to them, uPVC or composite doors may differ in their overall design. This makes fitting the flap for your cat more difficult as you have to make sure that the hole is of the correct size.

It is also worthwhile reading through the directions included with the kit to locate a template drawing that can be used to mark out the position of the hole in the door. This will help you to determine where the opening must be and also make sure that the template is properly placed on the door. Utilizing a spirit level to check that the template is sitting flush against the door will be extremely helpful.

Cut the Flap

You will need to cut an opening in the door panel to install your cat flap before you can attach it. This can be a tricky job, and it is recommended to get help from a professional cat flap fitter for this job should you not have the knowledge or skills to do it yourself. It is also recommended that you read the instructions included with the cat flap kit to find out how much to install a cat flap to do this correctly.

To do this you need to take a measurement of the height of your cat or kitten's belly and use this as a reference point. As a rule of thumb put the flap around 10-15 centimeters higher than the ground. This is the average height of the cat's belly. This will allow your cat to pass through the flap easily and make it difficult for other cats and nosy neighbours to enter or exit.

Draw the location of the cat flap on the door using pencil. If your kit comes with a template, place it over the door. Use the markings on the template to drill holes at every corner. You will then be able cut out the design of the template and replace it with your cat flap.

You can put in your cat flap yourself inside an uPVC or wood door if you are confident using the Jigsaw. Make sure you don't cut through any of the door's mullions, or vertical rails. You can use a jigsaw to cut the panel into a square or circle according to the design of your cat flap installation cost flap. Take your time and don't try to force the jigsaw to cut faster.

After the hole has been cut, carefully place your cat flap installation near me flap in its new place of residence. Make sure it is solidly secured. If the flap has screws put them on the protruding bolts. Once the screws have been installed, sand the rough edges and then apply sealant to any gaps. This will block the entry of draughts into your home.

Install the Flap

If you have a basic cat flap, you can open it and encourage your pet to go through by putting a little bit of cat food in the front of the door. You can also push the cat using sticks or your hand. Once your cat flap cost near me is used to walking through the flap it will be able to move in and out as it wishes so you can let it out and in without having to be there to open the door for it throughout the day (and likely in all weather conditions).

It is possible to fit the flap inside an UPVC door or glass door, however it may not be as simple as putting one on a wooden external door. This is because UPVC doors and some types of glass doors don't have a uniform thickness. This can have a major impact on the way you cut the flap's hole, and how well the flap fits after installation.

The mounting kit might include a template that shows you the best places to drill holes. If the kit does not include a template you can use a photocopier to make your own. When cutting, it's important to not push the jigsaw hard so that you don't make a larger hole than necessary in your door.

Some cat flaps are available in circular shapes, which can be more difficult to put in. If you have a circular flap it's important to make sure the hole is in the proper position on your door, because if it's not, the cat will not be able to use the flap and could be stranded outside all day (or even at night).

Certain cat flaps come with locks that allow you to determine when your cat enters and leaves. These can be very useful when you're worried about your cat going out at night and then coming back in due to the darkness, or if you're at work all day. The lock can be turned on to allow entry or exit, and some are locked in either direction allowing you to shut the door completely. This is especially helpful for older or ill cats who aren't keen on going out in rainy weather.