• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and cozy form of heat that has no harmful gasses or soot. They are easy to install and operate - just like an electric fire.

The BARDA contract will support the development of the BioFire emerging CoV panel, which is a nucleic acid amplification test to be used with BioFire filmArray Systems to detect of human acoronaviruses from nasopharyngeal oropharyngeal samples as well as saliva samples.

Eco-friendly

Bioethanol is a green alternative for gas or wood. The fuel is created using plant by-products, and a natural process converts sugars into alcohol. Bioethanol has numerous advantages over other types of fireplaces, including the absence of harmful emissions and a much lower carbon footprint. Bioethanol is also a safer alternative to other fires because it doesn't produce smoke or soot. It also doesn't require a flue, and can therefore be used anywhere in your home or in your garden.

Multi-drug resistant bacteria (MDR) are among today's most serious health threats. Fortunately, new testing techniques can help identify MDR bacteria and other infections early enough to prevent further complications. BioFire FilmArray is one of these tests. This test uses a symptom driven approach to detect pathogens that can cause sepsis. The results are available within an hour so that providers can begin treatment right away.

The process of Molecular PCR that amplifies DNA or RNA molecules into millions to billions of copies. This allows for the analysis of small amounts of body fluids or tissues to determine if specific genetic sequences are present. It is an invaluable tool for lab professionals, and it helps them identify serious diseases in a quick and cost-effective manner. The BioFire FilmArray PCR system is a cutting-edge tool for infectious disease diagnosis and can be utilized in a myriad of applications in hospitals and labs.

In the case of respiratory tests it is possible to use a simple swab to be wiped across your nose and sent to the lab to be analyzed. BioFire's technology provides a rapid turnaround time, allowing clinicians to act quickly. This means fewer waiting for results and improved outcomes for patients.

The Chanouf Farm Biofire company has created an agroforestry recycling unit that uses pear and olive waste to create biochar and biomass power. The resulting products are then offered to the public as an eco-friendly alternative to traditional coal briquettes and wood charcoal. In addition they can be used to fuel a Kachelofen fireplace that provides radiant heat that is a green alternative to gas and electric fires.

Clean burning

With a bio-fire you not only save energy, but also help the environment. This is because the combustion of bioethanol fireplace indoor (twinefridge7.Bravejournal.net) does not produce harmful gases like carbon dioxide. Instead, it releases water vapour and heat. This makes it a safer and healthier option for indoor ethanol fireplaces use.

Ethanol is produced by the fermentation of plant sugars and is classed as an energy source that is renewable. It is produced in a short time, and it will not be as depleted as fossil fuels like coal and oil. Bioethanol can also help reduce the dependency on imports from foreign countries and reduces the risk associated with shortages in supply.

Bio-fires are easy to install and can be used in existing fireplace openings or as a freestanding unit. This makes them a great alternative to wood and gas fires. They also make a great choice for offices and homes without a chimney or flue.

When a bio-fire is ignited, a special media is created inside the burner that absorbs liquid ethanol fuel, making it available to burn. The ethanol fireplace burner fuel is ignited in the flames, and the vapours are released into the air through the vent. The flames appear more natural and gives a mesmerising beauty that can't be replicated using gas or real wood fires.

Another benefit of bio-fires is that they don't require a flue or vent to replenish the oxygen that is consumed during combustion. They also don't release carbon monoxide which must be vented into the air in open fronted gas fires.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. It takes around an hour. This allows doctors detect and eliminate respiratory illnesses much faster than with conventional tests that require visits to the patient. Both patients as well as the health system gain from this.

Safe indoors

Bio-fires can be used indoors much more safely than traditional fires because they don't produce smoke or ash, nor carcinogenic fumes. The bio-fires don't produce carbon monoxide which is dangerous if breathed in. The bio ethanal fire-ethanol fuel used in them is flammable however, and you should be careful when handling the burner and refilling your fire. The fuel should only be added after the burner has been switched off and your fire has cooled. Any spills need to be cleaned up promptly.

The company's diagnostic FilmArray system--BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels cleared by the US Food and Drug Administration as well as three additional panels approved for emergency use and six environmental test panels. The tests include a respiratory test panel designed to quickly recognize and distinguish respiratory illnesses such as COVID-19. emerging coronaviruses and COVID-19.

The COVID-19 panel was awarded a grant by the Biomedical Advanced Research and Development Initiative (BARDI), which is part of the US Department of Defense's Strategic Access Program. The COVID-19 test is based on antigens, and allows clinicians to differentiate symptoms caused by COVID-19 from other respiratory infections. This test has similar accuracy as the rapid antigen tests that are currently used.

The company is also developing a SARS-CoV-2 test for its Respiratory Panel 2.1. This multiplexed nucleic acids amplification test will be available on the BioFire filmArray 2.0 and Torch Systems and will detect SARS CoV-2 and 21 respiratory pathogens from nasopharyngeal and saliva samples in less than an hours. The assay is being developed using an rapid timeframe and submission to FDA for EUA and 510(k) clearance is expected in Q3 of 2020.

Bio-ethanol flame effect fires are safe to use, but must be kept away things that can ignite, like pillows, curtains and blankets. They should not be placed close to anything that could catch alight and you should keep flammable materials at least 10 feet from them. The bioethanol fuel should be kept in a dry, secure location that isn't easily reached by pets or children.

Simple to use

A bioethanol fireplace is simple to use and has no flue to be concerned about. You only need a place to store it and fuel. Once you've filled the burner with fuel, you can light it. This will create an appearance of an actual flame. Once the flame is lit, it will heat up the room without releasing much smoke. It also produces heat, similar to a wood-burning fireplace. Bio fires are also very easy to maintain and don't require any servicing or maintenance, other than the occasional wipe down.

Contrary to most tests that are rapid that are available, the BioFire RP2.1-EZ test uses an syndromic approach to detect the most common signs of infection and returns results in about 45 minutes. The test is for patients with symptoms of upper respiratory tract and has a specificity of 98%. The test can identify up to 19 bacteria and viruses in one test which makes it a good option for managing patients.

The BioFire system integrates multiplex PCR testing, sample preparation and report on results into an integrated platform. This allows laboratories to simplify their processes and eliminate the need for a serial procedure that involves individual and send-out tests. This could lead to better outcomes for patients, since the right test is used the first time and the need for costly tests that are based on culture is eliminated. The BioFire system can detect pathogens at the cell level as well as their antimicrobial resistance gene. This information is more reliable than traditional methods.

Molecular diagnostics is increasingly being used to improve patient outcomes and treatment. The BioFire panel RP2.1+ employs a syndromic method to simultaneously target 23 pathogens that are often implicated in respiratory illnesses. The test is available on the BioFire film array 2.0 and Torch systems and provides results within 45 minutes.

In the US, this assay is currently available under FDA Emergency Use Authorization (EUA) and will be made commercially available once the initial DoD demand is satisfied. Additionally the BioFire Defense Team has developed an automated, sample-to-result assay to quickly identify of COVID-19. This assay is in development and will be available when initial DoD demands are fulfilled.