• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and may even be fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any shards will fall onto the fabric rather than on the floor where they can be trodden under and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional arrives to repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a number of problems that include sliding. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try repositioning the hinges. To accomplish this, you'll need to open the window to access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you are unable to move the hinges, upvc window repairs you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. You'll first need to close the window and perform a test fitting. The corners of the sash need to be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks from windows can not only cause degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. Most often, upvc repair window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on how severe the issue is, old caulking may need to be removed. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce your energy efficiency.

Make sure that the drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window replacement near me. In more serious instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze, it may be the hinges that are at the fault. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It is very easy to change the hinges on a window but it's much simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be more than happy to give you advice.

It is also essential to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges can also be misaligned due to wear, which can cause an opening between the frame and sash. This can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them re-aligned or replaced. In addition, the interlock could be unbalanced. It is located on the hinge's side, and could require to be cleaned. In some cases it might be necessary to replace these.

The next common cause of draughts is the window seals. They are prone to wear or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to stop draughts. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be placed over your window sill. They can help stop cold air from entering and keep your home warm and cosy!

Your windows made of upvc will continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is always best to seek professional assistance immediately.