• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the cloth rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the property until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may be interested in a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. In time, they could develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll have to open the window to get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you are happy with the fit of your window, you can tighten screws to secure them in place.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as quickly as you can to ensure that your upvc window repairs window watertight and draughtproof.

uPVC handles could also loosen. Often it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and do a test fitting. The corners of the sash must be aligned with the casing joint. If it does not, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and that the sill pan is angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of long-term water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. This can be easily fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens with a breeze. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. It is very easy to replace a hinge on a window however it is easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for UPVC window repairs the arrows that are on each hinge to determine the direction in which the window repair should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be unbalanced due to wear, creating gaps where the sash and frame meet. They can be fixed by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it's possible to give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. They will help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repairs windows made of upvc will provide excellent security and insulation for your home. However, it is important to realize that all windows have a life span and there may come a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc, it's best to consult an expert immediately.