• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace a UPVC Window Handle

If the window handle of your upvc is damaged, replacing don't panic. Replacing a upvc window handle is a relatively simple task and can be accomplished in just a few steps.

If you have a cranked or inline espagnolette style window handle, all of them feature a square spindle that protrudes from the back plate and is slotted into the locking mechanism.

Determine the type and size of the lock and handle

Over time windows' handles or locks can be damaged and lose their function. The good news is that this issue can often be remedied without replacing the entire uPVC window unit. One of the first things to do is determine the type of handle and lock you have, as this will determine what replacement parts you'll need.

You can determine the type of handle by examining the base. There is an anchoring screw or pin that holds the handle to its base. If the screw is missing it could be a sign that the handle has broken off from its base section. If the handle has broken internally and is no longer gripping the spindle, it could be a sign that it is in need of replacing.

There are many uPVC handles however the Espag handle is the most popular. They are usually fixed using two bolts, and come with an articulating spindle that is connected to the lock mechanism within the window frame. These handles are usually used on uPVC tilt and turn windows.

Cockspur handles are another kind of uPVC handle. They're similar to Espag handles, but they have a lower projection from the frame. These handles are typically used on older uPVC windows.

Finally, there are also Venetian window handles that are similar to the Espag handle, but they have flat bases that allow them to be placed in a flush position with the frame. These are a great choice for homeowners looking for a stylish, elegant handle that blends with their uPVC window frames. The handles are available in a range of colors that will match any design.

Measure the spindle

Before ordering a new handle, it's crucial to know how the old one is attached. This will tell you how it is tight or loose and if it will fit properly into the window frame. You can do this by identifying the type of handle you have and measuring the length of the spindle. The spindle is a steel shaft that connects your handle to the lock on the window sash replacement frame. It's available in different sizes with the current industry standard being 8mm. Older handles might have a 9mm cross-section, replacing so it's crucial to measure the old one to ensure you get the correct size replacement.

There are several types of window handles. However, the most common are inline Espagnolette and the cockspur handle. These handles operate a locking system in the window. They utilize shootbolt rods to secure the window after it has been closed. They are held in place by pins or screws depending on the type of handle you have.

You can find replacement upvc window handles online and in a lot cost of replacement windows uk DIY stores. They come in a range of finishes and are suitable for both new or replacement windows. They can also be key-locking or non-locking for additional security.

To remove your old handle open the window and remove the screws that hold it in place. Place the screws in a container to protect them from damage. Once the screws are removed, remove them carefully from the handle. Find the distance from the base of the spindle to its tip. This will provide you with the information necessary to purchase the right replacement. The spindle of the handle is the iron shaft that connects it to the gearbox for locking in the window frame.

Take off the handle from the old one.

Changing the handle of an uPVC handle is a simple task that takes less than five minutes if you have the proper tools. The first thing you need to determine is the size and type of the handle or lock. This will allow you to choose the right replacement. You can then measure the spindle to make sure that the handle is suitable. In the end, you'll need remove the old handle and replace it with the new one.

Most uPVC handles come with inline Espagnolette handles. These handles feature a central spindle which slots into the locking mechanism on the window. They are typically easy to remove but could require force if they get stuck. The handle is usually fixed by two screws, which you can remove with the help of a screwdriver. Depending on the kind of handle you have, you may be required to take out the pins that hold it in the position.

After you have removed the screws, you can take off the handle that was previously attached. The top of the base plate should be visible when the handle is in an open position, revealing two screws you can remove. If the sticker is still in place, you'll need to remove it.

With the screws that came off the handle, you are now able to put the new handle in place. Make sure the handle is in the open or locked position, and then align the screw holes with those on the window. Once you've done this you can put on the caps on the screws and test the new handle to confirm that it functions properly. It's simple to swap a uPVC handle, but you have to do it correctly.

Replace the handle with the new one.

It's time to put in your new handle if you have successfully removed the old one from the frame. Begin by finding the screw covers and then lifting them out with your screwdriver. After they've been removed, put them in a safe place and proceed to the next step.

Then screw the spindle in by aligning it with the existing hole. Be sure to align the holes in the handle with the holes in the window frame. You should make use of a screw of the same length as the one used before or it could cause the handle to not being secure.

uPVC Espag handles are equipped with a 7mm square spindle that rotates the lock mechanism installed to the window. This kind of handle can be found in most modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) have an extended nose that locks over the frame's outer or transom bar cross members and are commonly found in older uPVC windows.

It is essential to lock and unlock the window numerous times after the handle is installed. If everything goes according to plan the new uPVC window handle should now be properly attached and running smoothly. If not, the steps above will allow you to identify any issues and resolve it quickly. If you are struggling with your uPVC handle or are experiencing other problems with your glazed home improvement, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers are certified to repair or replace various window handles and frames, making us an excellent choice for your double-glazing needs.

Test the new handle

Over time, the handles of uPVC can get damaged and worn out. This can make them less effective and secure and therefore it is important to replace them as quickly as you can. It's also an ideal idea to do this after you upgrade your windows, since changing the handle and lock will help maintain the integrity of the windows you have just bought.

There are many different styles of uPVC window handles. Some are fixed by pins or screws, while others feature blades that fit into the lock mechanism. Each lock type has its own method of replacing it, and you'll need to know what type you have.

Espag window handles are the most popular type, and they're typically found on the latest uPVC windows. They have spindles that extend from the handle to the gearbox for locking and when you open the windows, it activates the locking mechanism. They are also easy to take off however, you must be careful not to harm the mechanism or the handle when doing so.

Cockspur window handles are a popular option for uPVC windows. They're held by a spur that is snagged onto the striker plate in the shape of a wedge on the frame, and when you close or tilt the window, it activates the locking mechanism. This type of handle is more difficult to repair than other types however it's a good choice for most homes.

Venetian window handles are secured with two bolts. They have a slim projection from the frame, which is not the case with the Espag handle. These handles are perfect for those who want to have a flush-fitting handle that blends in with uPVC window frames. They're an excellent choice for commercial and residential properties.