• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. It's discreet and does not require additional key fobs in order to operate.

The device makes use of the buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence of up to 20 presses long. This will allow your vehicle to start.

Simple PIN code change process

Many homeowners are upgrading their security because of the increase in vehicle theft. There are many types of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However, not all of them are equally effective at protecting your car. While a tracking device can help you find your vehicle in the case of theft, it does not stop the crime from happening in the first in the first place. An immobiliser, on contrary, does exactly what it says on the label: it shuts off the engine of your vehicle to prevent it from being started. The autowatch ghost installers near me Ghost how much is a ghost immobiliser one of the most sophisticated options available, making it virtually impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car, the ghost device creates an exclusive sequence that has to be entered prior to the engine will start. This can be done using the heater, window or indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is especially beneficial if you have to surrender your car for valet parking or servicing because the immobiliser is activated and not disabled.

The audi rs3 ghost Installer is an innovative and unique device that operates with your vehicle's buttons rather than as a standalone unit. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security device that protects your pride and joy against key cloning, hacking and ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are an approach used frequently by thieves to bypass existing immobilisers.

The benefit of CAN data over conventional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques as well as detected by traditional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console, or door panels, to create a unique disarming sequence. You can even create a sequence that is as long as 20 presses for added security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost will stop car thieves from putting in an ignition key that is not in use or replacing the ECU to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with the appropriate parameters, like 30mph speed limit), so you can offer your vehicle to an attendant or valet without needing to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that can be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and stop your car from starting normally until you enter a custom code. The system can be turned off or on via your smartphone's app, without the need for extra wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. It transmits a message to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from a different vehicle, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and then started. A South African company that is at the forefront of car security systems technology developed the Ghost immobiliser. It guards you against hacking or key cloning, and even key theft. The only way thieves could take your vehicle is physically towing it away, and even then they wouldn't be able to drive it.

Ghost makes use of buttons on your vehicle, such as the indicator stalk, the steering wheel, and the door panels, to generate unique PIN codes which must be entered to use your vehicle. This is done without any extra hardware, such as a keyfob. It can take up 20 to 20 presses. It is also unrecognizable to diagnostics equipment and does not transmit radio frequency signals so thieves are not able to use sophisticated RF scanning or code grabbing techniques to determine if a security system has been installed.

Ghost is more difficult to remove than car alarms, which require disarming with the buttons. This makes it an excellent complement to an GPS tracking device, which can be used to track your vehicle after it's been stolen.

Emergency PIN code override

You do not have to look far on social media for stories or videos of cars that have been stolen with the most advanced technology tools. Key-cloning devices, for instance, and hacking tools that allow thieves to start the car without the original keys.

Our Ghost immobiliser is designed to combat this and provide you with an additional layer of security in order to prevent your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN is entered along with the original key fob to stop the engine from starting. The unique PIN for override is on the black card you will receive after installation. It's easy to remember as there are no LED indications.

The device is hidden in the wiring of your vehicle and doesn't emit radio signals. This means it can't be detected by diagnostic software that can tell what type of security systems you have installed. This makes it a great alternative to the tracking device.

In contrast to other security systems that use a relay inside the engine bay, CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependent). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

They can also be linked to an analog alarm, immobiliser or tracker. This must be specified prior to the installation. They are also compatible with service/valet modes and a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical issue.

Service/Valet mode

In recent years, there has been an increase in vehicles being stolen with the owners' keys. It's easier than ever before to steal your pride and joy due to the availability of key cloning tools and door lock picks. We have developed the Autowatch ghost vehicle immobiliser Immobiliser to combat this. It stops your vehicle from being driven even if you keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or a key fob. This means it isn't detected by diagnostics or any other car hacking devices. It also prevents the user from using an ECU or key to circumvent the system, because only the PIN number allows the engine to start.

The device is hidden in your car and can be reached via the buttons on your steering wheel, centre console, and door panels. A unique & changeable PIN code sequence up to 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN-bus immobiliser that is being designed. It will prevent your vehicle from being driven or even started when you don't enter a PIN number first. If you're driving away with the device armed, an indicator will appear on your dashboard that will flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function normally. If you don't enter your PIN at this point, the indicator will continue to flash and require a new PIN each time you attempt to start your car.