• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace and window generally fit into frames that were previously in use very easily. However If you have double pane windows that are secured by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled under.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the distance between the window and the door is significant, you may want to use a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sliding. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and check for fitting. If you're satisfied with the fit of your window, tighten the screws to hold them in place.

If you are unable to move the hinges, you might have to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and draught-proof.

uPVC handles may also loosen up. The majority of the time this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window repairs leaks are caused by damaged or missing sealant.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. When it is time to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and decrease its energy efficiency.

Verify that the drainage holes do not have debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze It could be the hinges that are at fault. They can be easily replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical component, hinges can wear out over time. It's easy to change the hinges on a window, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be required to realign them. The interlock may be disaligned. It is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.

The seals may wear out or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a little maintenance and repairs your windows made of upvc will continue to provide excellent security and insulation for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more economical to replace them than fix them. So, if you are experiencing issues with your Upvc windows, it is best to seek professional assistance as soon as you can.