• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. However when windows with double panes are held in place by internal beading, it'll be more difficult to take out the panes that are in place and replace them with new ones. In this situation you'll need locate some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep water and drafts from entering your property until a professional is able to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is large, you may think about the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sagging. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in the right place.

If you aren't able to move the hinges, Upvc window Repairs you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as possible so that your upvc repairs windows are watertight and safe from drafts.

uPVC handles could also become loose. Often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double-glazed window, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze, it may be hinges at the fault. They can be easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change a window hinge, but it's easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain manner or because of improper installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give assistance.

It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also reduce the possibility of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also become misaligned due to wear, causing gaps between the frame and sash. They can be repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it's possible to just give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will provide excellent insulation and security for your home. However, it is important to recognise that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than fix them. If you encounter any issues with your upvc window it is recommended to speak with a professional as soon as possible.