• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

Depending on how old your subaru car keys replacement is, you might need to have your key fob programmed by an automotive locksmith. This is usually done through the connection of a programming machine to the computer in the vehicle.

To program your Subaru car, you must open the door to the driver's side using the door button, and then close it. You will hear the chime sound and see the dome lights blink in the instrument panel.

Step 1: Locate the Transmitter Circuit Board

There are many ways to program your key fob. The first step is to be aware of what kind of key fob you own. You can do this by inspecting the shape of the key fob, or by listening to your car for a sound.

Once you've got the information and have it, you can begin the process of programming your keyfob at home. You will need an flathead and a steel key for this. You can open the key fob by twisting it. Then push the key into the case and then release the battery from the small tabs which hold it in place. Replace the battery and then put the case back together.

Step 2 Step 2: Unscrew the Key Fob Case

It is recommended to replace the battery of key fobs if they're not functioning. However, there are situations where the buttons on the key fob might be broken. If you notice that the metal contacts of the button have become loose try soldering them back in their place in order to get them back to function properly.

Before you start the process, ensure that your vehicle's doors are closed and that your ignition is turned off. You can do this by closing the driver's door, and then pressing the door button ten times in rapid succession. Then, you'll hear the instrument panel chime and your dome lights should flash. This means you're prepared to move forward.

Step 3. Insert the fob of your key into the ignition

Many articles on the internet will explain how to program your new or replacement lost subaru keys keyfob at home. However, many of them don't offer specific instructions. Reprogramming an electronic lock is best done by a professional auto dealer in Fort Bliss or a locksmith.

Sit in the driver’s seat with all doors shut and the engine off. Use the door button to open all of the doors. Open and close the driver's door two more times. Inject and remove the ignition key (don't turn it) 10 times over 40 seconds. The system will chirp if the settings are altered.

Step 4 Step 4: Switch on the ignition

Before proceeding with this method of programming a key fob, it is important to remember that this method only works in the event that you already have a functioning key already. If you don't an auto-locksmith or a dealer will have to program keys for your Subaru Key Cutting Fort Bliss.

After your key has been programmed, you should be able start your car in about five minutes. Begin by closing all doors and shutting off the engine. Assume a seat in the driver's chair and unlock the doors by pressing the button on the door. Place the key in the ignition and turn it back to the first position. The electrical systems will be activated, however, the engine will remain in neutral. Repeat this procedure 10 times.

Step 5 Step 5: Lock the driver's Door

Subaru offers a variety of high-end vehicles with key fobs, which can lock and unlock doors, start the car, and defrost the windows. These devices are sometimes not working.

Contact a locksmith or dealer to solve the issue. This will resolve the issue and ensure that your car is safe.

To do this, open the door to the driver's side and close it. Then, insert the ignition key and turn it to the first position. Then, turn it back to the off position. Repeat this ten times a row as quickly as you can. After ten times, you should hear a chime.

Step 6 Step 6: Press the Lock/Unlock button on the driver's Door

If you're looking to change the battery on the subaru replacement key key fob, the procedure is easy. The first step is to open the exterior fob casing. Then, use an flathead screwdriver, to pry open the inside of the case and remove the old battery.

After you have removed the old battery, put in the new one and close the case. Sit in the driver's seat and open all doors using the door-button control. Put the key in the ignition and turn the key to ensure that the electrical system is turned on, but the engine is off. Repeat this 10 times in a line until you hear a chime sound on the instrument panel. This will turn the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

For some owners, the annoyance sound that is heard when locking and unlocking a Subaru key fob from outside the vehicle can be distracting. In some instances you can deactivate the chirp by closing and opening all doors while double-clicking lock button on the key fob.

Switch the ignition off and shut all doors as well as the lid of the fuel-filler. Press and hold the lock side of the key fob's lock button for 10 seconds. After this is done, the instrument panel emits an audible chime. The chime signals that the lid of the fuel-filler door are locked. The setting can be altered so that the lids and doors lock automatically without having to press a request switch.

Step 8: Enter your 8-digit Transmitter Number

Note down the initial series of 8-digits, and keep it handy. Once you're in the driver's chair, close the doors and turn the key into the first position. After 10 turns, your instrument panel should sound at least once.

Next, open the key fob case and find the transmitter circuit board inside. The circuit board will have one or two 8-digit numbers. Follow the directions in the guide to register the code. This may require visiting the dealer for older models.