• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

Over time the handles on your doors will wear down and need to be changed. It is essential to match the dimensions of the old handles when replacing them.

The three measurements to be inspected are the top screw position as well as the key hole and lever sizes. Use the size guide to assist you.

Inline Lever/Lever

A lever handle is a contemporary door handle designed to suit new or replacement doors. This style door handle is available in a wide range of styles & finishes. A number of manufacturers make this handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The handles of uPVC/Composite are constructed from durable materials, and are ideal for multi-point lock doors that require a robust design. The handles are inline and use the same screws and spindle to fix them. They are easily fitted on a new or existing uPVC/Composite doors.

The handle can be positioned and angled to fit the needs of all users. The handle has been endurance-tested to 200,000 cycles. This ensures that the finish is of high quality and performance will last for a long time. The lever that springs is adjustable to accommodate a wide range of locks. This is particularly useful for doors with narrower openings where the cylinder is situated further back in the door. A shorter lever can be used for doors with latches that can be opened by the thumb inside.

Lever Pad

A Lever Pad door handle made of upvc functions differently than lever handles found on most doors. These handle types are either operated by one spindle, or two spindles, inline or offset. They are generally employed on UPVC double glazed doors and are available in a variety of variations and styles.

The handles have been tested to a minimum of 200,000 cycles and are available in various finishes like White, Silver, Chrome & Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for the intended use.

All UPVC levers for handles come with a spindle, screws and can be mounted on a uPVC door. The 211mm backplate fixation centres allow for a bigger handle, which is typically beneficial when replacing an old or damaged multi-point door lock mechanism. The handle levers come with a spring, which solves the issue of door handles that move out of the horizontal position when they are not being used.

It is essential to match the PZ dimensions of both the multipoint lock as well as the uPVC doors when choosing a replacement window handle UPVC spindle and window handle repairs. This measurement may also be referred to as 'handle centres or cylinder centres'. It is important to match the correct handles.

Once you have decided on the correct size of PZ it is important to make sure that the lever and push pads are designed to fit the American with Disabilities Act compliant handles that you need for your door. These are usually round or square, with an internal lever, and an external push pad.

The majority of the UPVC Lever Pads that we sell are spring-loaded. This means that they return to a horizontal position when not being used instead of hanging, and possibly sticking in the frame. This keeps draughts out of the home. Also, the majority of UPVC lever pad handles are handed that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are commonly used on uPVC doors, but they can also be used on other types of door. The cylinder lock is operated with a key that unlocks the cylinder's casing. This reveals pins that can be aligned with the pins in the lock, allowing them to turn the revolving camera, opening the door. Euro Cylinders are available with up to six pins. Internal and external doors require different levels of security.

Selecting the right cylinder for your needs is vitally important; this depends on how your door and handle are used. Doors that are external, for instance are required to be fitted with cylinders that are more secure, whereas doors inside can be secured with a standard cylinder. Certain cylinders are equipped with additional features that can increase security, such as anti-drill or anti-bump properties.

A euro cylinder needs to be properly measured to ensure that it is the correct size for your door. The cylinder must be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn in the event that one is present. It is recommended to do this while the lock is in place, but when this isn't possible, you can remove it to take measurements. It is crucial to ensure that there is no extension of the cylinder beyond the handle or escutcheon. This can make it susceptible to lock snapping attacks.

The majority of modern cylinders have been made with bump and anti-drill features that are built into their design. They are designed to decrease the chances of an attack by forcing the cylinder rotate in a different direction. This will help deflect the attack, and protect your door.

There are also cylinders that are constructed to withstand snapping. This is a typical attack on cylinders. A specific tool is used to break the lock's break line and then the front of the cylinder is snapped off. This is a quicker and more convenient method of gaining access than the use of a multipoint locking system. It also leaves less evidence of the burglary which can hinder insurance claims.

Spring Cassette

The spring cassette is positioned within the base of your door handle backplate, providing a spring solution to return the multipoint lock handles back to their original position after usage. These handles used to have no spring and would drop when the locking window handle mechanism was disconnected. The addition of this simple element is one of the best ways to correct this issue and is a great way to prevent your doors made of upvc from getting stuck in the open or closed position, since they are not always easy to manually close by hand.

These spring cassettes have been specifically designed for use with multipoint locks sprung They will not work with non-sprung multipoint handles. You must have a bespoke hole cut into your backplate to allow these to fit (please check the image for a technical diagram). These cassettes are a solution for damaged or missing cassettes on the backplate of uPVC door handles. They feature a square cut-out that accommodates an 8mm spindle and are available in a variety of.

These spring cassettes are a great value solution to the issue of door handles that have become sagging. They are easy to fit and will increase the life span of your uPVC doors. Contact us to learn more about our wide range of uPVC accessories and spares. We are available to help and happy to provide professional advice.