• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires offer a warm, comfortable form of warmth with no harmful gases or soot. They are easy to set up and operate just like an electric fire.

The contract funded by BARDA supports the development of the BioFire Emerging CoV Panel, a nucleic acids amplification test for use with BioFire FilmArray Systems to identify human coronaviruses that are emerging and known in nasopharyngeal or oropharyngeal sw and saliva specimens.

Eco-friendly

A bioethanol fire is a great alternative to wood or gas fires. The fuel is produced using plant by-products, and the natural process converts sugars into alcohol. It offers many advantages over other fireplace types that include the absence of harmful emissions and a much smaller carbon footprint. Bioethanol is a better alternative to other types of fireplaces because it doesn't produce smoke or soot. It does not require a flue and can be used in the garden or at home.

A multi-drug resistant (MDR) bacteria is among the most serious health threats of our time. New methods of testing can identify MDR bacteria early and avoid further complications. One test that can help is the BioFire FilmArray multiplex PCR system. This test utilizes a symptom driven approach to identify pathogens that could cause sepsis. The results are available in an hour so that providers can begin treatment right away.

The Molecular PCR process increases DNA and RNA molecules to millions or billions of copies. This permits the analysis of small bio ethanol fires (you can check here) samples of body fluid or tissue to determine if certain genetic sequences are present. It is an invaluable instrument for lab professionals, and can assist them in diagnosing serious illnesses in a timely and cost-effective manner. The BioFire FilmArray PCR system is an innovative tool for the diagnosis of infectious diseases, and it can be used for a wide variety of applications in hospitals and laboratories.

In the case for respiratory tests, you can apply a swab of alcohol to your nose before sending it to the lab. BioFire’s system allows clinicians to respond quickly and with a short turnaround time. This means fewer waiting for results and improved outcomes for patients.

The Chanouf Farm-Biofire company developed an agroforestry waste recycling unit, that makes use of olive and pear tree waste to create biochar and biomass energy. The resulting products are then sold to the general public as a sustainable alternative to traditional wood charcoal and coal briquettes. These bio ethanol fireplace insert-waste products are suitable for burning in a Kachelofen fireplace that produces radiant heat and is a more sustainable alternative to gas or electric fires.

Clean burning

By using a bio-fire, you not only save energy but also help the environment. Bioethanol's combustion doesn't produce harmful gases, such as carbon dioxide. Instead, it releases heat and water vapour. This makes it a cleaner and safer option for indoor use.

Ethanol can be made by the fermentation of sugars in plants. It is an energy source that can be used in the future. It is produced in a short time and won't be as depleted as fossil fuels like oil and coal. Bioethanol helps reduce dependence on imports from foreign countries and reduces the risks of supply shortages.

Bio-fires can be set up easily in existing fireplace openings, or as an independent unit. They are a viable alternative to gas and wood fires. They also make ideal for homes and offices without a chimney or flue.

When a bio-fire is lit, a special media is created inside the burner that absorbs liquid ethanol fuel, making it available to be used for combustion. The ethanol is then burned by the flames, and the vapours are emitted into the air through the vent. The flames appear more natural and give an amazing beauty that cannot be replicated using gas or real wood fires.

Another advantage of bio-fires is that they don't require a flue or vent to replenish the oxygen that is consumed during combustion. They also don't produce the carbon monoxide that must be vented out into the room in gas fires that are open-fronted.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. This takes about an hour. This allows doctors to detect and rule out respiratory illnesses quicker than they could with conventional lab tests that require patient visits. Both patients and the health system profit from this.

Safe indoors

Bio-fires are much safer to use indoors compared to real fires, as they produce no smoke or ash, nor carcinogenic fumes. They also do not emit carbon monoxide, which could be deadly if inhaled. However, the bio-ethanol fuel can be flammable and you should be cautious when handling your burner as well as refueling it. The fuel should only be added after the burner has been turned off and your biofuel fire has cool. Any spills must be cleaned immediately.

The company's diagnostic FilmArray system - BioFire Torch and BioFire 2.0--are simple to use and can run eight different diagnostic panels that have been cleared by the US Food and Drug Administration as well as three additional panels approved for use in emergencies, and six environmental test panels. The tests include a revolutionary respiratory panel that was developed to rapidly identify and differentiate between respiratory diseases, including COVID-19 and emerging coronaviruses.

The Biomedical Advance Research and Development Initiative, which is part of the US Department of Defense Strategic Access Program has granted the COVID-19 Panel a grant. The COVID-19 system is based upon antigens and allows doctors to distinguish symptoms caused by COVID-19 from other respiratory illnesses. This test has a similar level of accuracy to the antigen tests that are rapid and are currently used.

In addition the company is in the process of developing a SARS-CoV-2 assay for its Respiratory 2.1 Panel. This multiplexed nucleic acids amplifying assay will be made available on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal or saliva samples within less than one hour. The test is being developed using an rapid timeframe and submission to the FDA for EUA and 510(k) approval is expected in the third quarter of 2020.

While bio-ethanol fireplaces flame-effect fireplaces are extremely safe to use, they must be kept away from any flammable material like pillows, blankets, and curtains. They should not be placed near anything that can catch fire. Keep all flammable items away from the flame-effect fires by at minimum 10 feet. The bioethanol fuel must be stored in a dry, secure location that isn't easily accessible by children or pets.

Simple to use

The bioethanol fireplace doesn't have a chimney to worry about. All you need is a location to put it in and some fuel. Once you've filled the burner and lit it, ignite it. This will create a flame that looks just like an actual fire. When the flame is lit it will heat up the room with no smoke. It will also produce heat similar to a fireplace that burns wood. Bio fires are also very easy to maintain and don't require any maintenance or maintenance, other than the occasional wipe down.

Unlike most rapid tests, the BioFire RP2.1-EZ test employs an syndromic approach to detect common symptoms of infectious diseases and returns results in about 45 minutes. The test is for patients with upper-respiratory symptoms and has a specificity rate of 98%. The test can identify up to 19 bacteria and viruses in a single sample which makes it a good choice for patient management.

The BioFire system integrates multiplex PCR testing, sample preparation and result reporting into one integrated platform. This lets laboratories to streamline their workflow and eliminates the necessity for a sequential approach that requires a separate and send-out test. This can result in better patient outcomes as the appropriate test is chosen the first time and the need for costly tests that are based on culture is eliminated. Additionally to this, the BioFire system can identify pathogens and their resistance genes to antimicrobials at a molecular level, providing data that is more precise than conventional methods.

Molecular diagnostics are increasingly utilized to improve patient care and outcomes. The BioFire panel RP2.1+ employs an syndromic approach to simultaneously target 23 pathogens often implicated in respiratory illnesses. The assay is available on the BioFire film array 2.0 and Torch systems and provides results in just 45 minutes.

This assay is available in the US under FDA Emergency Use Authorization. It will be available commercially after initial DoD requirements are fulfilled. The BioFire Defense team has also developed a fully automated, test-to-result assay that allows for the rapid detection of COVID-19. The test is currently under development and will be available once the initial DoD demand is satisfied.