• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

As time passes the handles on your doors will get worn out and will require replacement. It is crucial to match the dimensions of the handles that were previously used when replacing them.

The top screw position, the lever and the keyhole dimensions are the three measurements you need to determine. Refer to the size guide for assistance with this.

Inline Lever/Lever

A lever handle is a contemporary door handle designed to work with new or replacement window handle doors. This style of door brompton carry handle is available in a variety of styles and finishes. A number of manufacturers make this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of robust materials and are suitable for multi-point lock doors which require a robust design. The handles are inline and use the same spindle and screws to secure them. They can be easily mounted on any uPVC/Composite door.

The spring lever design allows the handle to be positioned and angled to ensure a comfortable experience and is suitable for all users. The handle has been tested for endurance up to 200 000 cycles. This helps ensure that the finish is of high quality and performance will last for a long time. The lever that springs is adjustable to fit a broad range of locks. This is particularly useful for doors with narrower frames, in which the cylinder is further back. A shortened lever is also an excellent option for doors that have latches that can be operated by a thumb turn inside.

Lever Pad

A Lever Pad upvc door handle operates differently than lever handles on doors. These handles are operated by a single spindle or by two spindles inline or offset. They are typically employed on UPVC doors with double glazed window handles glazing. They come in a variety of finishes and variations.

The handles have been tested to a minimum of 200 000 cycles and are available in various finishes like White, Silver, Chrome & Gold. The finish is BS EN 1670 Grade 5 and resistant to corrosion. This provides the handle with the best performance and long-lasting durability for the purpose it was designed for.

All UPVC lever pads for handles come with a spindle, screws, and can be fitted on the uPVC door. The backplate fixing centres of 211mm permit a bigger size handle that is often a benefit when replacing a faulty or worn multi point door lock mechanism. The levers for these handles have a spring, which solves the issue of door handles that sag out of horizontal position when not being used.

It is important to match up the PZ dimensions for both the multipoint lock and the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement is also referred to as the handle centre or 'cylinder centres and is an essential aspect to match the appropriate handles.

After you have identified the correct size of PZ and the correct PZ size, you must make sure that the push and lever pads are designed to match the American with Disabilities Act compliant handles you require for your door. They typically have rectangular or round in design with an internal lever and external push pad.

Most of the UPVC lever pads we offer are sprung, which means that they return to their horizontal position after not in use, rather than hanging out and possibly sticking in the frame. This prevents draughts from entering the home. The majority of UPVC lever pad handles come in both left and right handed models that allow them to be put on either side of doors.

Euro Cylinder

Cylinder locks are found on uPVC and other kinds of doors. Cylinder locks are operated with a key that unlocks the cylinder's casing. The case is then able to reveal pins that can be aligned with the pins in the lock and allow them to rotate the camera that rotates, opening the door. Euro Cylinders can be fitted with up to six pins with both internal and external doors typically requiring different levels of security.

Selecting the right cylinder for your needs is essential; it is contingent on how your doors and handle are used. For instance, doors that are external should be fitted with a more secure cylinder while doors inside can be secured with a standard cylinder. Certain cylinders are equipped with additional features that can improve security, such as anti-drill or anti-bump properties.

A euro cylinder must be properly measured to ensure it is the right size for your door. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, should there be one. If you are unable measure it with the lock in position, you can take it out of it. A cylinder that is protruding beyond the handle and escutcheon could be vulnerable to attacks, such as snapping locks, therefore it is essential that it's not too long.

The design of many modern cylinders has anti-drilling and bump resistance features. They are designed to decrease attack chances by forcing the cylinders to turn in a different direction. This can help deflect the attack and protect your doors.

Some cylinders are designed to resist snapping. This is a more frequent kind of attack on cylinders, where the break line inside the lock is smashed by a tool that is specially designed to break the front of the cylinder to allow the double glazed door handle to be opened. This is a quicker and more convenient method of gaining access than using the use of a multipoint locking system. It also leaves no evidence of the break-in which can hinder insurance claims.

Spring Cassette

This spring cassette is located inside the base plate of the door handle. It is a spring-loaded solution to bring your multipoint lock old aluminium window handles to their resting position after use. Previously a lot of handles did not have a spring integrated into them and without this they can droop or drop when the locking mechanism is removed. This simple feature is among the best methods to correct this issue and is a great way to prevent your doors made of upvc from becoming stuck in an open or closed position, since they aren't always easy to manually close by hand.

These spring cassettes were created to be used with a spring multipoint lock. They are not compatible with handles that aren't sprung and you'll need to cut a hole into your backplate for them to fit. (Please check the image for a more detailed diagram). They are a replacement for damaged or missing cassettes inside the door handle backplate of many kinds of uPVC doors. They are sold as one unit. They feature a square cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a great value solution to the problem of sagging door handles. These spring cassettes are easy to install and will extend the life of your uPVC door. Contact us for more information on our range of uPVC accessories and spares. We are always available to provide expert advice and to assist you.