• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and may even be fatal. It is important to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. However If windows with double panes are anchored by internal beading, it'll be more difficult to remove the old panes and put in new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you are going attempt to remove the glass panes yourself, it is essential to wear appropriate safety gear such as gloves that are thick and window repair eye protection. It is also recommended to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the fabric rather than on the floor, where they could be trampled on and cause further damage.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and fix the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated Window Repair as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window repairs near me is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows so you can access the frame. Then, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you could have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. It is essential to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen. This is often caused by screws that have become undone over time, but it could also be due to the mechanism of the handle wears out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need close the window and perform an initial test fit. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the issue the old caulking may need to be removed before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it blows open with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window but it's much simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by looking for the arrow on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. This issue can be fixed by sending us a photo via our website and we will be more than happy to give you advice.

Regular lubrication of hinges is also essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the risk of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. The hinges may also become misaligned due to wear, causing a gap between the frame and sash. These can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it could be necessary to have them re-aligned or replaced. Second, the interlock can also become disaligned. It is located on the hinge side and could require to be cleaned. In certain instances it might be necessary to replace the hinges.

The second most frequent reason for draughts is window seals. They are prone to wear or damaged over time, and allow air to escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder, these are typically made of fabric that are filled with some kind of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs your windows made of upvc will provide excellent security and insulation for Window Repair your home. It is crucial to keep in mind that all windows will eventually wear out and it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.