• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the Ghost Immobiliser. This system is discreet & does not require any additional key fobs in order to operate.

The device uses buttons on your vehicle (steering wheels, door panels and centre console) to create a unique pin code sequence that can be modified up to 20 times. This will allow your vehicle to start.

Simple process to change the PIN code

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. A tracking device can aid in finding your vehicle in the event of it being stolen, but it will not stop the crime. An immobiliser, on the other hand does exactly what it says on the tin: it disables the engine of your car so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done by using the heater, window or indicator stalk buttons. In addition to this, there is also an app on mobile that acts as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This is a great option for those who want to offer your car to valet parking or servicing. The immobiliser remains active.

The Ghost is a very unique and innovative device which is used in conjunction with the buttons in your vehicle rather than as a separate unit. This means that it's not only a highly effective deterrent against vehicle theft but also a transferable device onto any other vehicles you own, making it much more investment-wise than a traditional steering wheel lock.

Small device that is weatherproof

The Autowatch local ghost immobiliser installer Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also stops ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus, which disables the engine. It can be installed in the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical technique used by thieves to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost immobiliser price doesn't produce LED indicators and instead uses the buttons on your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even make this sequence up to 20 presses long to increase security. The iPhone app lets you make a single, authorised connection using a pairing code that is unique to the Ghost and the communication between the two devices is encrypted.

The porsche 911 ghost installer prevents car thieves adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It can be temporarily operated in the Valet/Service mode (with parameters set, such as a 30mph speed limit) which means you can give your car to an attendant or valet without having to enter a code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device is able to intercept signals and stop your car from starting up normally until you enter a customized code. The system can be turned off or on via your smartphone's app without the need for extra wires.

Standard factory immobilisers for automobiles function through a transponder built into the key, which sends an indication to the ECU. If the correct code is transmitted the car will begin however, if the transponder is replaced with one from another vehicle the immobiliser won't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of safety systems technology developed the ghost immobiliser problems; please click the next post, immobiliser. It shields you from hacking or key cloning, and even key theft. The only way that a burglar could take your car is by physically towing it away, and even then they would not be capable of driving it.

Ghost utilizes the buttons of your car, such as the indicator stalk as well as the steering wheel and door panels to generate an unique, changeable PIN code sequence that must be entered prior to you are able to use your car. It does this without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals so thieves are not able to utilize sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

Ghost is harder to remove than car alarms that require disarming using the buttons. This makes it a great alternative to an GPS tracking device which can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You don't need to look far on social media to find stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without your original key fobs.

The installing ghost immobiliser immobiliser was designed to combat this and offer an extra layer of security to keep your vehicle from being targeted by thieves. It is created by creating a unique pin code push sequence from your buttons on the steering wheel, door panel and centre console. The unique pin code is entered alongside your original key fob in order to prevent the engine from starting. The unique override pin can be found on the black card that you will receive following installation. It is simple to remember because there are no LED indications.

The device is hidden within the wiring of the vehicle and doesn't emit radio signals. This means it can't be detected using diagnostic software that can tell the security system you have installed. This makes it a great alternative to a tracker.

Contrary to other security systems which rely on a relay in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to disable the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also compatible with valet and service modes, and are is a great alternative to a tracking device when you bring your vehicle to the dealer for an electrical problem.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen with no owner's keys. It's now easier than ever to steal your pride & joy with the availability of key cloning tools and door lock picks. We have developed the Autowatch ghost immobiliser installation Immobiliser to combat this. It prevents your car from being driven, even if your keys have been copied.

It connects directly to your car's ECU (Engine Control Unit) through the CAN data loop. It's completely silent as it doesn't use radio frequency or keys fobs. This means it isn't detected by diagnostics or other car hacking devices. It also protects you from adding a new ECU or key to circumvent the system, because only the PIN number allows the engine to be started.

The device is hidden in your vehicle and is accessible via buttons on your steering wheel, centre console, and door panels. A unique and changeable PIN code sequence up to 20 digits has to be entered before you can start your car.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car being started or driven away if a PIN code isn't entered prior to. If you are driving away with the device in motion, an indicator will appear on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN at this point, the indicator will continue to flash and require a new PIN code every time you try to start your car.