• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your cat go in and out whenever they want without needing to let them in or out. They can also help prevent your cat from urinating in the house.

It is much easier to put the cat flap on a upvc cat flap door panels panel than one made of glass but you'll require some expertise and appropriate tools.

Measure the Door

Fitting a cat flap in a door can be tricky but as long as you use the correct type of cat flap be patient and follow the instructions provided it shouldn't be too much trouble. We will show you how to draw the shape, then use the jigsaw to slice the area in the door and then finish off the job by securing the flap to the door. This will ensure the flap stays in position and protects the doors from damage caused by rain and wind.

To determine the size of the cat flap you need, measure the width of your pet. This will ensure that the flap is big enough to let your pet go inside and out of the house without needing to open and close the door every time, but also small enough to stop them from moving too far in either direction.

Once you have the measurements you can mark out where on the door the template should be placed, typically this is done using an X, but some kits come with drawings that show where to drill, if yours does then stick it to the door and draw a line around the door. If your door has moulding or sill on the bottom of it then make sure you have enough space as this will keep your cat safe and will prevent them from getting access to your home.

Utilize a set square to ensure that you are cutting correctly and to make sure the hole is a good rectangle shape. Once you are satisfied with this, you can begin removing the remaining door material. Use a set square to ensure you are cutting the material correctly and that the cut is a rectangle. When you are happy with the final result, you can take out the rest of the door material.

Draw a Line

The cat flap is a great method to allow your pet to go in and out without having to worry about them being a nuisance to guests or leaving unwanted gifts in the home. It also stops draughts and helps to keep the temperature of your home in a stable manner. However, installing an animal flap on your door might seem like an intimidating task for those who haven't done it before. This can lead many people to seek out an expert joiner or carpenter to complete the task. While this is definitely an option, it is possible to do the job yourself if you have the appropriate tools and follow the instructions carefully.

It is much easier to do on doors made of wood, however it is still possible with uPVC. However you should be cautious not to damage the doors since this could make it impossible to claim your warranty. The first step in the process is to measure the door and ensure that it can accommodate the new cat flap. If you have a standard uPVC panel it's easy. However when your door is composite or another type of door, you may have to be more cautious.

The next step is to measure the size of your cat flap installation's belly. This is the measurement from the floor to the lower part of the cat's stomach, and you'll need find a place on the door where this measurement will fall within the range your cat can comfortably pass through. Once you know this, you will be required to mark the area with pencil and a spirit level to ensure that the hole you make will be suitable for your cat.

After you've marked the area, it's now time to cut the hole. It is crucial to be patient and use a jigsaw in order to ensure the cuts are clean and smooth, not rough and uneven. This could cause damage to your door. You should also remember to wear safety glasses and a dust-proof mask whenever using the jigsaw, as dust from the saw could be hazardous to your health. After you have finished cutting the hole, you'll require sandpaper to smooth the edges so that the cat flap can be easily inserted.

Make a hole

Installing a cat flap into an existing door panel or double glazing sealed unit can be difficult. You might be tempted to tackle the job yourself, but unless you have plenty of experience in DIY it is probably best to get an expert to complete the job for you. A botched job may not only look ugly, but it could also be an enigma for security and also allow cold air to get in when the cat is outside, and hot air to escape when inside.

The first thing to do is mark the location of the hole in the door with an eraser and an ax level. This will ensure that it is correctly located and is in a straight line with the other parts of the door. It is important to have some sandpaper on ready for any rough edges.

Once the line has been marked you should cut out the hole with the jigsaw. Remember to wear the appropriate safety gear for working with an electric tool. If you are worried about the sound produced by a jigsaw you can buy a cordless version which is quieter and more user-friendly to use.

It is crucial to only remove the material needed to fit the cat flap. A small amount of material is required to increase the thickness of the the cat flap itself but removing more than that can cause problems and even harm the frame of the door.

A door made of upvc door panel cat flap could include a metal frame, or a panel inside that could interfere with the microchip cat flap, and in this case you'll need to make an oversize hole to ensure the metal doesn't get in contact with the wall of the cat flap double glazing flap, if this is the case, it is important to fill in the gap and seal it with water.

If you're installing an animal flap to a upvc door or double-glazed window with a metal frame then you'll need to speak to a specialist who can provide you with a new pane of glass with the hole for the cat flap inside. This is less expensive than trying to install the flap into an existing pane that was not designed specifically for this purpose.

Install the Flap

Cat flaps give your pet the freedom to move around whenever they want, allowing them to relax at home whenever they like. If you've got an uPVC door it can be difficult to fit a cat flap, particularly when you don't have a glass pane that can be cut to fit one. If you're able to purchase and install a replacement half-glazed uPVC panel, it's possible to add the cat flap to these doors. It's not just a matter of slicing an opening in the door. You'll also need to take a few steps to ensure that it is secure.

A composite door panel usually has an flimsy plastic outer layer bonded to a soft polystyrene core that is insulating. It is crucial to be careful when cutting the material. This kind of door comes with a template that can be used to cut the hole.

After you've marked the position of the hole in your door, it's time to install the flap. You can choose from a variety of models, ranging from simple push-button units to microchip activated ones that allow your pet in. Whatever type of cat flaps you select, it's vital that your cat is able to use the flap comfortably without getting caught in bad weather.

A circular fitting is more effective than a square one, as circles can be cut more securely into glass. This is because square holes make the glass more susceptible to cracking when drills are used on it. This is also a safer choice since you don't have to drill into the toughened glass which could break and cause harm to your pet or family members. This is especially important if there are children or elderly people at home who might be injured by glass shattering.