• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

It can be difficult to put up a cat flap but with the right guidelines, it's not all that difficult. First, decide how high you want the cat flap to be (on average the belly height). Mark this point on your door and use the template included to help you drill.

If you have a kitten that is still a baby, gently prop the door slightly open and invite it to pass through. Reward it as it passes through.

Take a measurement of the door

A cat flap lets your pet to move into and out of your home at the time that is convenient for you. This can help keep your cat in good health as it ensures that it is getting enough exercise and also be able to go back inside if it is trapped outside during bad weather. This will reduce the amount of time you have to let your cat go in and out and also make your home safer by notifying you when it has left.

It is crucial to make sure that the cat flap is placed properly to stop your pet from being forced through it or escaping by other animals (e.g. dogs). You should determine the height of your pet's belly and the height of the doorway in your home to make sure the flap is at the proper height. You can adjust the position of your flap when your cat is smaller or taller than average.

The next step is to use a spirit level to mark the centre of the door that you will be installing the flap. Then, using the marks as a guideline, cut out the form of your flap using the aid of a jigsaw. Once you've cut the area, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes that are required.

The process of fitting a cat flap isn't as difficult as you may believe and it shouldn't take more than two hours for the entire process from beginning to completion. The process can be slightly more complicated if you are required to install it in the form of a uPVC door or a composite one. This is because composite door cat flap doors come in a variety of thicknesses, which can affect the way the holes are cut. We always recommend that you call an expert for your first experience with glass.

Measure Your Cat

You can save yourself hours of ignoring the cat's meows to be allowed in or out. This is especially helpful for cats that are in the house during all seasons while you work.

If you want to fit a cat flap in your door, it is essential to determine the size of your cat prior to beginning the task. It may appear to be a simple task, but it is essential to measure your cat correctly. Otherwise, your pet might find it difficult to use.

First, make sure that your cat is calm prior to taking measurements. You will have to hold your cat in a place where they cannot move. Also, ensure that the measuring tape is flat and not curved against the body. By keeping the ruler or measuring tape against their body from the top of their head to the base of their tail can allow you to get an exact measurement.

Once you've determined your cat's measurement, it's time to look at the door to decide the best place to place the flap. A good tip is to position the flap in the middle of your cat's belly as this will allow them to get through it without too much effort. This will also prevent the flap making a lot of noise as it swings open and shut.

It is also important to take into consideration the thickness and structure of the uPVC door or composite. While timber doors are all of a similar thickness, uPVC and composite doors can be very different in their overall structure, which can make fitting cat flap in upvc door panel a cat flap step flap more difficult because you must make sure that the hole you make is the proper size for your pet.

It is also worth reading through the directions that come with the cat flap kit to locate an outline of the template that can be used to mark the location of the hole in the door. This will allow you to see where the opening must be and make sure that the template is correctly positioned on the door. It is also beneficial to use a spirit-level to ensure that the template is placed flush against the door.

Cut the Flap

You'll need to make an opening in the door panel for your cat flap prior to you can install it. This is a difficult job and it is recommended that you seek out the assistance of a professional cat flap fitting service for this job in case you don't have the skills or experience to do it yourself. It is also recommended that you review the directions that come with the cat flap kit to discover how to do this correctly.

You can take the height of your cat's or kitten's stomach as a guide. As a rule of thumb, place the cat flap about 10-15 centimeters above the ground. This is the standard height of the belly for cats. This way your cat can move through the flap without difficulty and will also make other cats or snooping neighbours difficult time trying to enter or leave.

Mark the position of the cat flap on the door with pencil. If your kit has the template, place it over the door. Utilize the markings on the template to drill holes at every corner. Then, you'll be able cut out the template shape and replace it with the cat flap.

If you are installing your cat flap in a door made from wood or uPVC, you are able to do it yourself if are comfortable with the jigsaw. Ensure that you do not cut through any of the door mullions or vertical rails. You can use a jigsaw to cut the panel into a circle or square according to the design of your cat flap. Be patient, and don't force the jigsaw into cutting faster.

Once the hole is cut then carefully insert the cat flap into its new home and ensure that it's securely fixed. If the flap has screw caps put them on the protruding bolts. After the screws are installed, sand the rough edges and then apply sealant to any gaps. This will prevent drafts from entering your home.

Install the Flap

If you have a standard cat flap, you can try to encourage your pet through it by placing a small amount cat food on the front of the door. Alternately, you can push the cat through using your hand or a stick. Once your cat is accustomed to walking through the flap, it should be able to go in and out as it wants and you should be able to let it out or in without to open the door for it throughout the day (and likely in any weather).

It is possible to fit the flap inside a UPVC door or a glass door, however it's not as easy as installing one in a wooden external door. This is because UPVC doors and some types of glass doors do not have an even thickness. This could have a dramatic effect on the way you cut the hole for the flap, and can also affect whether your flap will fit properly once it's been installed.

Based on the type of cat flap you choose, it may come with its own mounting kit and a template that shows precisely where to drill holes for it. If the kit doesn't come with a template, you can create one yourself. When cutting, it's important to not push the jigsaw to the point that you create a bigger hole than you need in your door.

The majority of cat flaps are square or rectangular in shape, however there are also some which are circular, and are typically more difficult to place. If you have a circular flap it's essential to make sure the hole is in the proper location on your door as if it's not, the cat can't use it and could be stranded in the open all day (or even night).

Certain cat flaps have locks that let you regulate when your cat enters and leaves. These are very helpful in the event that you are worried about your cat going out at night and then coming back in due to the darkness, or you're at work all day. Certain locks can be used for either entrance or exit, while others can be locked in both directions. This is beneficial for older cats or sick cats who do not want to venture out in cold weather.